• Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Recommendations

  • Shipping Options

    We have different services to fit your needs.

Turbo Speed Sensor Kit - Fits BorgWarner & Garrett G Turbos

Full Race
Many in stock
Turbo Accessories
$156.00
Turbo Speed Sensor Kit Turbo Speed sensors are critical in accurately identifying how fast the turbo...
$156.00

customers are viewing this product
Turbo Speed Sensor Kit - Fits BorgWarner & Garrett G Turbos

Turbo Speed Sensor Kit

Turbo Speed sensors are critical in accurately identifying how fast the turbo is spinning and where your engine is operating on the compressor map. Traditionally, installing these sensors was difficult for the end user – requiring complex machining at a compound angle to carefully hit the contour area of the wheel bore at the right angle. The latest generation BorgWarner and Garrett G turbos have this precision machining already done to every EFR compressor cover. Note: We strongly recommend connecting this sensor to our Turbo Speed Gauge!


Speed Sensor Kit Includes

  • (1) Speed sensor, frequency output
  • (1) Speed sensor hold-down bolt

GARRETT IS PLUG AND PLAY, NO DRILLING

BORG WARNER INSTALLATION PROCEDURE:
A 1/4″ Drill bit is all thats needed and the length/depth is very short. This hole allows the top of the sensor to come flush with the contour surface. The hole does not have to be precise as no sealing takes place in the small hole that the user just created. The hole must be deburred where it pierces into the wheel bore. The goal is to make sure that there are no sharp edges remaining in the wheel bore that the compressor can become caught on. The speed sensor is powered by a +5V supply and the return signal is a variable frequency square wave that has maximum amplitude of 5V and has a 50% duty cycle.

    • 1. Remove compressor cover from turbo (CAREFULLY)
    • 2. Place cover on a table, with some kind of backing so that it won’t slide while being drilled
    • 3. Equip a hand drill with a 1/4” drill bit
    • 4. Drill out the bottom of the speed sensor bore while being careful not to nick the side-walls of the bore where the speed sensor o-ring will seal.
    • 5. De-burr the hole where it protruded into the compressor wheel region.
    • 6. Lubricate the speed sensor o-ring
    • 7. Install the speed sensor into the bore and check for a good fit.
    • 8. Use a file on the mounting surface if the sensor needs to protrude further into the bore. The sensor tip should be nearly flush (within 0.5mm) with the edge of the hole.
    • 9. Tighten speed sensor hold-down bolt.
    • 10. Re-install compressor cover on turbo and verify that the compressor wheel spins freely.

Click HERE to view a downloadable PDF file of how to install the Speed Sensor.

 

Read More
Read Less
Shipping policy

Thank you for visiting and shopping at Affinis Motor Sports LLC. Following are the terms and conditions that constitute our Shipping Policy.

Domestic Shipping Policy & Shipment processing time

All orders are processed within 2-3 business days. Orders are not shipped or delivered on weekends or holidays.

If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email or telephone.

Shipping rates & delivery estimates

Shipping charges for your order will be calculated and displayed at checkout. If no shipping charge is shown upon checkout, we will contact you and invoice shipping separately. We cannot calculate ever changing rates for some items coming in from Japan, Australia, or other countries when special ordered.

Special order items can take anywhere from 1 week to several months depending on vendor lead time. Please check with us before placing an order.

 
Special order products

Any item that requires options to be selected such as Hypertune intakes requiring anodizing, runner and injector configurations and combinations, is considered a special order / made to order / drop shipped product. These special order products cannot be cancelled once shipped. Exchanges will be given for defective products. If the merchant is unable to send a replacement item, refund will be given once the item is returned to us.

Please inquire on which items are special ordered, made to order before placing your order if you are unsure.

If the vendor is unable to fulfill and order in a timely manner then we may choose to cancel the order and have the merchant refund us.

International Shipping Policy

We currently do not ship outside the U.S.

Returns Policy

We accept returns on unused products within 30 days of delivery. Excludes custom order products and specialty order items.

Your cart

×