Stepping motor "STS26A" Maximum angle of deflective 270 degrees (full sweep) is controlled by the microcomputer up to 4600 division (0.057degrees each) to provide high precision in the accuracy of information generated. The stepping motor is sufficient for quick response of all sorts of professional motorsports.
The scale is compressed to acquire great visibility and ease of use. *Wide-angle scale is used at the idling range 0~3,000RPM. *The scale is fitted to recent engine power band and linear scale is used from 3,000RPM to 11,000RPM.
LED illumination The gauge dial is invisible while the ignition switch is off. Once the ignition switch is turned on, a clear display appears by colored LED illumination. The gauge dial illumination and the red emitting needle pointer provide high visibility
Opening and closing modes The gauge dial and the needle pointer performs opening and closing modes interlocked with turning ON/OFF of the ignition.
Peak memory function The maximum RPM during driving can be stored and checked later.
 Adjustable brightness There are 5 stages of brightness for the daytime and 6 stages for the nighttime. The brightness can be decreased/increased with the vehicle lights switched on/off.
Dual warnings of light and buzzer Two customer-defined warning RPMs can be set. When the RPMs are exceeded, the warning LED blinks/lights up and the warning buzzer sounds.
Exclusive large-sized indicator The exclusive large-sized indicator which lights in green and red enhances the visibility of warnings in addition to the warning LED in the gauge.
Detachable switch unit The large-sized switch unit with light is fixable on the gauge and is also detachable.
Exclusive mounting band and back case The gauge is clinched by using the exclusive mounting band and back case. Wires can be stored in the back case neatly.
Gauge dials are invisible while the ignition switch is off. Once the ignition switch is turned on, a clear display appears with white LED illumination. A red emitting needle pointer increases visibility.
|
|
Ignition off
|
Ignition on (Amber Red Model)
|
Regular Position Bezel for 80mm (3 1/8") gauge is included in the product.
|