BorgWarner AirWerks S500 SXE 120110 aka S594SX-E
Utilizing the latest generation 93.80mm billet EFR compressor wheel aerodynamics with uprated 360 degree thrust assemblies, the all new ‘SX-Enhanced’ turbos redefine performance and value for modern turbochargers.
This proven design is packaged in a purpose built SX-E compressor housing with ported-shroud inlet and speed sensor port. It is paired with traditional Airwerks 110mm Inconel Turbine and Flexible Housing options. The brand new 93.80mm S500SX-E Turbocharger from Borg Warner is the largest T6 turbo in the Airwerks lineup. Higher airflow rates make this an excellent match for high-boost and high-power 94mm drag racing applications. Thermals are taken care of by an Oil-Cooled Journal Bearing only.
Compressor Type: Forged-Milled Wheel (FMW) Extended Tip
Compressor Wheel OD (Exducer): 120.00mm
Compressor Wheel Inducer: 93.80mm
Max Flow Rate: 187 lb/min
Max Recommended Turbo Shaft Speed: 607 m/s
Compressor Housing Connections:
Inlet: 6″ Hose Coupler
Outlet: 3.5″ V-Band or Hose Coupler
Turbine Type: Inconel S500SX Turbine Wheel
Turbine Wheel OD: 110mm
Housing Material: D5S sandcast
Housing Size and A/R ratio: S500SX-E 120110 (S594SX-E) is available in eight (8) different turbine housing configurations:
- 0.85 A/R T6 Single Scroll
- 1.00 A/R T6 Single Scroll
- 1.15 A/R T6 Single Scroll
- 1.30 A/R T6 Single Scroll w/ 0.50″ Longer Discharge
- 1.45 A/R T6 *Single* Scroll 4.25″ Centerline
- 1.15 A/R T6 Twin Scroll
- 1.45 A/R T6 Twin Scroll 3.62″ Centerline
- 1.60 A/R T6 Twin Scroll
Turbine Outlet: 5.75″ Marmon
BorgWarner SX-E Turbo Features:
- Available as a complete turbo -or- Supercore (no turbine housing) to retrofit existing Airwerks installations.
- Forged milled compressor wheels with Optimized compressor blade aerodynamics
- All-new severe duty 360 degree thrust bearing
- Compressor cover integrated speed sensor port and pre-machined boost port
- Flexible compressor cover outlet options: coupler or vband
- Interchangeable with existing Airwerks turbine housings for plug-and-play upgrades
- Optional Turbo Speed Sensor Kit
- Optional Turbo Speed Gauge
Airwerks® Series Turbochargers
Simple. Scalable. Strong.
Airwerks turbochargers are designed for the competitive motorsports market as well as drivers retrofitting a naturally aspirated engine or looking for a little more performance from a factory turbocharged car.
Engineered specifically for drag racing, pulling, and road racing, AirWerks turbochargers have earned a reputation as robust, brute-force induction systems. Looking for a no-frills replacement? Want to upgrade your turbocharger? Working with limited space? BorgWarner’s AirWerks turbochargers are the perfect go-to product for many applications.
With a twin hydrodynamic journal bearing design, AirWerks turbochargers feature an effective high-pressure ratio compressor stage, extended-tip technology and a high-efficiency turbine stage. The configuration provides ultra-fast response and more than 70 PSI of boost.
- 3AN oil feed line is recommended. If -4AN or larger is used, an oil restrictor is required (just like GT turbos)
- This turbo uses a T6 Divided footprint, with 5.75″ Marmon Downpipe connection
- This turbo features an extended tip compressor wheel for increased high boost performance and map width.
Click HERE for the Borg Warner Turbocharger Troubleshooting Guide
- Max warm oil pressure: 5 bar (73.5psi)
- Max cold oil pressure: 8 bar (118psi)
- When starting a fresh engine build or in extremely cold climates – oil pressure must reach 0.5bar (7.2psi) within 4 seconds maximum.
- Do not load the engine with full boost and WOT until full operating oil pressure is present
- Do not load the engine with full boost and WOT if any boost leaks are present (this can result in turbocharger overspeed)