One of the most popular power upgrades for the Porsche 996 Turbo, X50, GT2 has been our high flow 3 inch Y-Pipe kit. Now this same kit that has been available for years is now available in full carbon fiber! The new Y-Pipe replaces the factory unit and 70% of the silicone boost hoses. Designed to work with the stock style intercoolers, we include new silicone adapters and cnc machined fittings. The new Y-Pipe reduces any possibility of pressure drop or blowing off a boost hose. As well, the Y-Pipe reduces the bend by about 45 degrees compared to stock for a straight shot to the intercooler. Because of the shape and design, airflow is improved which equals the improvement in power. Our end goal was simple, build a product that would retain the stock airbox, flow better, use OEM parts, and look the part!
Using our Mustang all wheel drive dyno, we tested the original part on a car with 91 octane and low boost set at 1.2bar. With fans moving fresh air to the intercoolers, we did a baseline on the car and achieved a starting point of 493whp and 477ft/lbs of torque. Leaving the car strapped to the dyno, we removed the stock Y-Pipe and bolted on the Agency Power upgraded carbon y-pipe. With everything secured in place, we fired up the car to give it a run with the new Y-Pipe. With absolutely NO changes to the cars configuration, the Y-Pipe added 21whp and 24ft/lbs of torque to the car. This was quite an impressive bolt on gain that also added style and potential scalable performance to the car.
This part fits all 2001-2005 Porsche 996 Turbo, X50, and GT2. All Agency Power products come with a LIMITED LIFETIME warranty when you fill out this form HERE.
All Agency Power products come with a LIMITED LIFETIME warranty when you fill out this form HERE